Huawei P30 and P30 Pro leak in full

Huawei P30 and P30 Pro leak in full
Case makers leaking smartphones ahead of the official reveal is nothing new, though in some cases (no pun intended), the information has been less then reliable. This latest leak, however, coming from case maker Spigen, is pretty much guaranteed to be the real deal.

A new batch of images showing various models of protective cases for Huawei's upcoming P30 and P30 Pro flagship models also reveal both handsets in their full glory. The Huawei P30 Pro is depicted nested in a transparent TPU case that has a sizable cut-out for the phone's vertical quad-camera setup and dual LED flash. The smaller P30 also sports a vertical camera array, though it has three lenses and the flash is situated right below the camera module, instead of to the side.



On the front side, both the Huawei P30 and P30 Pro flaunt thin bezels all around—with the exception of a slightly thicker chin—complemented by a tiny, waterdrop-style notch housing a single front-facing cam at the top. No traditional fingerprint sensors are to be seen in any of the leaked images, implying that they may be of the in-display variety, which comes as little surprise. 

Another interesting detail to be gleaned from the latest Spigen case leak is the date shown on some of the images, which reads "MAR 28." Huawei yesterday confirmed that the P30 and P30 Pro will be unveiled in late March, which seems to be in line with the information coming from Spigen.


Related phones

P30
  • Display 6.1" 1080 x 2340 pixels
  • Camera 40 MP / 32 MP front
  • Processor HiSilicon Kirin 980, Octa-core, 2600 MHz
  • Storage 128 GB + Nano Memory (NM)
  • Battery 3650 mAh
P30 Pro
  • Display 6.5" 1080 x 2340 pixels
  • Camera 40 MP / 32 MP front
  • Processor HiSilicon Kirin 980, Octa-core, 2600 MHz
  • Storage 512 GB + Nano Memory (NM)
  • Battery 4200 mAh

FEATURED VIDEO

10 Comments

1. Cat97

Posts: 1865; Member since: Mar 02, 2017

To be honest, they didn't put a lot of effort into this one. The top bezel is a wanna-be no-bezel but still slightly thicker than the sides, the chin is quite big for a flagship, display corners are not aligned with the frame corners, basically a design mess. I can only speculate that the inside follows the same philosophy: "do what you can and don't try anything to push it further". Pass.

10. BlackhawkFlys

Posts: 908; Member since: May 07, 2014

I think its the case messing up with the corners. The teardrop notch looks better if you have to put a notch.. I like the OnePlus and Oppo's teardrop notch more than this one.

2. shield

Posts: 834; Member since: Sep 12, 2015

Looks better than ugly Galaxy S10 series.

3. surethom

Posts: 1669; Member since: Mar 04, 2009

Very Nice & thank goodness the teardrop not hole for the camera. Will there be a new tablet Mediapad M6 released as well???

7. S4NDY

Posts: 235; Member since: Mar 14, 2016

I think M6 tablet coming later spring but its only 8" model (like M3) and M7 include 10" model too

4. Sparkxster

Posts: 1214; Member since: Mar 31, 2017

Design wise the p30 and p30 pro have a nice subdued improvementof the p20 design. Both look great.

5. shield

Posts: 834; Member since: Sep 12, 2015

6. rsiders

Posts: 1935; Member since: Nov 17, 2011

I can't lie, I think I like the tear drop notch the most outside of not having a notch at all.

8. S4NDY

Posts: 235; Member since: Mar 14, 2016

Its not "dual led" its single led and color temperature sensor like previous models Mate 20 ja P20.

9. Atrixboyyy

Posts: 596; Member since: Nov 03, 2011

Is that a teardrop not or is the the second essential phone?

Latest Stories

This copy is for your personal, non-commercial use only. You can order presentation-ready copies for distribution to your colleagues, clients or customers at https://www.parsintl.com/phonearena or use the Reprints & Permissions tool that appears at the bottom of each web page. Visit https://www.parsintl.com/ for samples and additional information.