x PhoneArena is hiring! Reviewer in the USA

Motorola PEBL U6 (V6) vs Pantech PG-C3b Size compare

phone

Motorola PEBL U6 (V6) Remove phone

Posted: 19 Mar 2005
Market Status: Released
phone

Pantech PG-C3b Remove phone

Posted: 11 May 2007
Market Status: Released

Add phone to compare

Design
Dimensions3.41 x 1.93 x 0.79 inches (86.5 x 49 x 20 mm)2.71 x 1.69 x 0.79 inches (69 x 43 x 20.3 mm) 
Weight3.88 oz (110 g)
the average is 5.3 oz (150 g)
2.50 oz (71 g)
the average is 5.3 oz (150 g)
 
FeaturesNumeric keypadNumeric keypad, Exchangable faceplates, Soft keys 
Display
Physical size 1.5 inches 
Resolution176 x 220 pixels128 x 128 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

 119 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio 25.22 % 
Additional display

Additional display - Shows specs of the phone's additional display

YesTFT 
Resolution

Resolution - Refers to the width and the length od the additional display

96 x 80 pixels96 x 64 pixels 
Physical Size 1.00 inches 
Colors

Colors - Shows the number of colors that the additional display supports

 262 144 
Camera
Camera0.3 megapixels VGA0.3 megapixels VGA 
Flash Yes 
Software FeaturesDigital zoomDigital zoom, Self-timer 
CamcorderYes  
Hardware
Built-in storage0.005 GB0.012 GB 
Battery
Capacity740 mAh850 mAh 
User replaceableYesYes 
Talk time6.67 hours
the average is 14 h (835 min)
3.00 hours
the average is 14 h (835 min)
 
Stand-by time10.4 days (250 hours)
the average is 16 days (390 h)
10.4 days (250 hours)
the average is 16 days (390 h)
 
specifications continue after the ad
Cellular
GSM850, 900, 1800, 1900 MHz850, 1800, 1900 MHz 
Phone features
NotificationsMusic ringtones (MP3), Polyphonic ringtones (24 voices), Vibration, Phone profiles, SpeakerphoneMusic ringtones (MP3), Polyphonic ringtones (64 voices), Vibration, Phone profiles, Speakerphone 
Other featuresVoice dialing, Voice commands, Voice recording, TTY/TDD, Push-to-TalkVoice recording, TTY/TDD 
Connectivity
Bluetooth1.22.0 
USBYes  
OtherComputer sync  
Availability
Officially announced14 Feb 200527 Mar 2007 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

08 Sep 200523 Nov 2006 
FCC ID value: IHDT56FJ1 linkFCC ID value: JYCPG-C3B link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head0.32 W/kg1.14 W/kg 
Measured in1900 MHz1900 MHz 
Body0.15 W/kg1.43 W/kg 
Measured in1900 MHz1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories