Some Samsung Galaxy Fold displays are experiencing disastrous issues

Multiple Samsung Galaxy Fold units are experiencing severe issues with their foldable displays. In some cases, certain areas of the panel present small defects, while other displays have become essentially unusable.
This is a discussion for a news article. To read the whole news, click here

106 Comments

1. kiko007

Posts: 7489; Member since: Feb 17, 2016

Don't buy ANYTHING in its first iteration, ever. Galaxy, iPhone, Tesla... doesn't matter. Wait for the kinks to get ironed out before you buy stuff like this!

24. Reviewerofstuff

Posts: 114; Member since: Jun 02, 2018

They are reviewers, they didn't pay for anything samsung sent the phone to them for free. (I'm sorry if you are referring to everyone in general

41. Scott93274

Posts: 6025; Member since: Aug 06, 2013

I think it's a general statement that is basic logic that applies to anything and everything in the tech industry. I did not read their statement as a message that was intended specifically to those currently experiencing the issue in the article. But putting that aside, I have seen the extensive testing Samsung has put their phones through after the Galaxy Note 7 fiasco, and I find it hard to believe that they thought that this foldable phone was market ready given how prevalent the issues have been in the review units. But I suppose this is to be expected when you rush your product so you can be the first to the market...

76. oldskool50

Posts: 714; Member since: Mar 29, 2019

Except they wasn't first. What rush? The product has been in R&D for at least 2 years. It's amazing how, when a product is released and it has problems, LIKE ALL NEW PRODUCT USUALLY DO, all of a sudden they RUSHED it to market to be first. Except Samsung wasn't first. I'm curious, I want you to define rush. Since you don't own such a company that makes products on this level or even close, how long should a product be in R&D for you to consider it not rushed? Because rushed to market to me would be, they thought of it today, and its gonna be release in 30 days or less. Maybe you just rattled off the first thing that came to your head. But using the word rushed to market for a product that has been in R&D for a couple years is just dumb.\ t certainly isn't ready for prime time, but it wasn't rushed.

102. Scott93274

Posts: 6025; Member since: Aug 06, 2013

Your understanding of the term "Rushing a product to market" is fundamentally flawed. There is no defined time limit for any and all markets that once crossed, a product isn't rushed, It could have taken them 20 years to develop the phone, but when it comes down to it, if they fail to properly develop the device to ensure it meets consumer expectations and has a failure rate as rampant as this device, then it's clear that they failed to perform adequate quality tests in order to sell units. I'm sure that most times this is done to appease stock shareholders, but when a product that is not ready for use and needs more time to fine tune, but is released anyways, that is what it means to rush something to market. Also, please provide me the brand and model name of another phone that's released. I don't follow phones news as closely as I have in the past, but I'm pretty sure there's no comparable phone from a reputable company that is readily available for consumers to buy.

27. JRPG_Guy

Posts: 122; Member since: Jan 13, 2019

Thanks to all the beta testers however

39. Scott93274

Posts: 6025; Member since: Aug 06, 2013

Android P in early beta was much better than Android O... That's not the case for Android Q, the beta version of that OS is a disaster! lol, but it's something I did to my own phone.

34. iloveapps

Posts: 521; Member since: Mar 21, 2019

You’re folding it wrong.

62. tuminatr

Posts: 1103; Member since: Feb 23, 2009

its a Samsung device not an Apple

77. oldskool50

Posts: 714; Member since: Mar 29, 2019

At least it was designed to fold. Explain why the iPhone 6S+ and iPad's are so easy to bend though? even Samsung's own tablets and phones are much harder to bend at similar price points. Even the Surface did far and away better on bend tests vs the iPad. It's no secret that aluminum is fragile and easy to bend. That why if you use less material to make it strong, you ave to at least put a thicker frame around the edges. Much like how cars work. Apple in their appetite for profit first and function later, should not be selling anything that can be bent with bare hands with as little as 20lbs of force. 20lbs is not heavy

51. eausa

Posts: 77; Member since: Feb 28, 2019

Phone is perfect. It's just not idiot proof.

90. bbycrts

Posts: 23; Member since: Nov 05, 2018

Two of the four failed phones didn't fail as a result of user error - they just failed. How is that perfect?

55. NarutoKage14

Posts: 1306; Member since: Aug 31, 2016

Almost every company would go bankrupt if nobody bought the first batches of their products. While your logic is should, following it would have us still living in the dark ages.

65. sissy246

Posts: 7000; Member since: Mar 04, 2015

Lot of people out there to be a first generation testers, I am not going to be one of them.

64. sissy246

Posts: 7000; Member since: Mar 04, 2015

WOW, I agree with you. I was very interested in this phone even though I had no plans to buy a first generation. First generation anything is always the experiment run.

78. oldskool50

Posts: 714; Member since: Mar 29, 2019

That's not entirely true. The only first gen devices that shoudl have such issues, liek in this case; is a device that has never been done. But this doesn't explain how that after 3 years it took appel to finally get teh Apple Watch to market, how come it wasn't even as good as Samsung 1st gen watch, that came out 3 years earlier? and samsung had release 3 more models that significantly improved in that same 3 years. Apple made wireless earbuds for the first time. Well wireless earbuds have been around for quite sometime. In fact, they bought a company that makes far better ones than the Airpods. What's the excuse for that? In fact the Beats X would have been perfect as wireless buds and they could have included them with the iPhone X, considering it was a $1000 phone. even Samsung release improved headphones after buying HK and the phone it came with wasn't even $1000.

91. bbycrts

Posts: 23; Member since: Nov 05, 2018

How on earth did this become an opportunity to bash Apple?

2. scarface21173

Posts: 636; Member since: Aug 17, 2014

Take it back am sure they will replace it.

6. Dr.Phil

Posts: 2291; Member since: Feb 14, 2011

Question is: how long is it going to take them to replace your item? They just reported being sold out of them so there would be a supply issue. And if it turns out that it was a manufacturing issue that caused it, that means they have to stop assembly and fix the problem and restart it again.

67. sissy246

Posts: 7000; Member since: Mar 04, 2015

I am sure after this they wont have a problem replacing a lot of them. There is going to be a lot of cancellation I bet.

40. maherk

Posts: 6702; Member since: Feb 10, 2012

It's not about replacing it, it's about the fact that the phone is getting damaged less than few days of using it. I was excited about this phone, but it's so worrying that problems like this are showing up this soon, kinda makes me skeptical about Samsung's claims that they have tested their hinge and the whole mechanism hundreds of thousands of times.

80. oldskool50

Posts: 714; Member since: Mar 29, 2019

But they were sent review units, which easily could have been defective ot begin with. That's why they were sent for free. That doesn't mean the final product still has the same issue. Am sure Samsung is aware of at leats 2 of these potential issues. Which is why it clearly says on the box...DON"T PEEL THE LAYER OFF THE SCREEN. Which is exactly what a couple of them did. One fact is for sure. if you set out to break a phone, you can and you will. It looks like that's exactly what they set out to do.

93. bbycrts

Posts: 23; Member since: Nov 05, 2018

Sending potentially defective units to the press who will be reviewing your product and reporting the results to the world? That's a suicide move. If anything, Samsung gave these extra attention. And apparently the warning about peeling the screen wasn't on the review units - Samsung figured it wouldn't be an issue because reviewers should be savvy enough to understand not to do that. They have said they'll be sure it's very clear to retail units that go out to buyers.

43. Scott93274

Posts: 6025; Member since: Aug 06, 2013

But after a single day of usage? That's a sign of a serious defect. The Galaxy Note 7 was a catastrophe for Samsung, and that device had a fewer percentage of users impacted and defective units were not blowing up on day 2.

79. oldskool50

Posts: 714; Member since: Mar 29, 2019

They were review units

106. ebilcake

Posts: 1219; Member since: Jul 16, 2016

For the debris under the display, they will replace them for sure For being an idiot and removing the top layer of the display, nope, if you buy a retail unit and try and explain that to Samsung they'll just laugh at you, and rightfully so.

3. Jphones

Posts: 252; Member since: Feb 10, 2012

First one of them removed the screen protector seal. An really nobody thought there'd be defective units

4. Godlymansean

Posts: 311; Member since: Apr 14, 2017

Hopefully they correct this before launch, but they may need to postpone launch date depending on how many models/units are affected.

69. sissy246

Posts: 7000; Member since: Mar 04, 2015

Launching this no is a big mistake IMO After this has happened. They need to cancel pre orders and get this fixed.

81. oldskool50

Posts: 714; Member since: Mar 29, 2019

AGAIN...these were review units which were likely defective to begin with.
This copy is for your personal, non-commercial use only. You can order presentation-ready copies for distribution to your colleagues, clients or customers at https://www.parsintl.com/phonearena or use the Reprints & Permissions tool that appears at the bottom of each web page. Visit https://www.parsintl.com/ for samples and additional information.