Notch-bearing LG G7 ThinQ appears alongside official colors

As can be seen in the image above, LG will once again be sticking to the tall display format that it debuted on last year’s LG G6, while the overall looks of the device bear a striking resemblance to the LG V30, at least in terms of the rear. As with the company’s previous flagship, a glass build is once again present, with the posterior panel boasting a circular fingerprint scanner just above the center. In addition, and aligned with the fingerprint sensor, LG has once again included its trademark dual-camera setup which includes a regular lens alongside a wide-angle sensor. Also, coupled with this is a laser autofocus system and a dual-tone LED flash. In regards to the front panel of the device, it is dominated by a large, notch-bearing display, with a slightly thicker bottom bezel.

Moving onto the frame of the device, four buttons can be seen. The first, which is located on the right side of the smartphone, is a dedicated power button, while two separate up and down volume buttons are present on the left side of the frame. Interestingly, however, and confirming previous rumors, a fourth button can be spotted below the volume ones, which is set to activate a dedicated AI assistant when pressed.

Aside from the design of the device, the image in question also shows off the LG G7 ThinQ’s wide range of colors. Acting as the standard color will be the new “Aurora Black,” although it’s worth noting that “Platinum Grey” will also be available as an alternative. Furthermore, the previously-seen “Raspberry Rose” color is set to make a comeback and there will be two variants of a new “Moroccan Blue” option, which will be available in both matte and glossy finishes. Nevertheless, the availability of colors is expected to vary by region and carrier.

source: AndroidHeadlines