x PhoneArena is hiring! Reviewer in the USA

Yezz Chico 2

phone

Yezz Chico 2 Remove phone

Posted: 18 May 2012
Market Status: Released

Add phone to compare

Design
Device typeFeature phone  
Dimensions4.13 x 1.77 x 0.57 inches (105 x 45 x 14.4 mm)  
Weight1.94 oz (55 g)
the average is 5.3 oz (150 g)
  
FeaturesNumeric keypad, Soft keys, D-Pad  
ColorsPurple, Blue, Red, White, Gray  
Display
Physical size1.8 inches  
Resolution120 x 160 pixels  
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

111 ppi  
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFT  
Screen-to-body ratio21.27 %  
Hardware
Built-in storage0.096 GB  
Storage expansionmicroSD, microSDHC up to 4 GB  
Battery
Capacity550 mAh  
User replaceableYes  
Talk time4.00 hours
the average is 14 h (825 min)
  
Stand-by time6.2 days (150 hours)
the average is 16 days (384 h)
  
Multimedia
RadioFM, Stereo  
SpeakersEarpiece, Loudspeaker  
specifications continue after the ad
Cellular
GSM850, 900, 1800, 1900 MHz  
Multiple SIM cards2 slots  
Connectivity
USBYes  
Other features
NotificationsMusic ringtones, Polyphonic ringtones, Vibration, Silent mode  
Regulatory Approval
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head0.62 W/kg  
Body0.53 W/kg  

To see the full specifications with in-depth details click here.

Latest stories