x We have placed cookies on your device to make your experience better. Find more info here.

Sanyo Katana Eclipse X vs Sanyo Katana II Size compare

phone

Sanyo Katana II Remove phone

Posted: 03 Jul 2007
Market Status: Released

Add phone to compare

Design
Dimensions3.60 x 1.90 x 0.70 inches (91 x 48 x 18 mm)3.70 x 1.90 x 0.60 inches (94 x 48 x 15 mm) 
Weight3.40 oz (96 g)
the average is 5.3 oz (152 g)
3.10 oz (88 g)
the average is 5.3 oz (152 g)
 
Display
Physical size2.0 inches2.0 inches 
Resolution176 x 220 pixels240 x 320 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

141 ppi200 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio28.53 %27.31 % 
Additional display

Additional display - Shows specs of the phone's additional display

TFTTFT 
Resolution

Resolution - Refers to the width and the length od the additional display

96 x 96 pixels80 x 80 pixels 
Physical Size1.00 inches1.00 inches 
Colors

Colors - Shows the number of colors that the additional display supports

65 53665 536 
Camera
Camera1.3 megapixels0.3 megapixels VGA 
FeaturesDigital zoomDigital zoom, Self-timer 
Camcorder220x176  
Hardware
Built-in storage0.01 GB0.021 GB 
Storage expansionmicroSD, microSDHC  
Battery
Talk time4.60 hours
the average is 14 h (870 min)
3.50 hours
the average is 14 h (870 min)
 
Capacity840 mAh820 mAh 
specifications continue after the ad
Technology
CDMA

CDMA - Code Division Multiple Access. A technique of multiplexing, also called spread spectrum, in which analog signals are converted into digital form for transmission. For each communication channel, the signals are encoded in a sequence known to the transmitter and the receiver for that channel. The foremost application is digital cellular phone technology from QUALCOMM that operates in the 800MHz band and 1.9GHz PCS band. CDMA phones are noted for their excellent call quality and long battery life.

800, 1900 MHz800, 1900 MHz 
DataEV-DO  
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

GPSGPS 
Connectivity
Bluetooth2.0, EDR2.0 
USBYesYes 
Other features
NotificationsPolyphonic ringtones (72 voices), Vibration, Phone profiles, SpeakerphonePolyphonic ringtones (72 voices), Vibration, Phone profiles, Speakerphone 
OtherVoice dialing (Speaker independent), Voice recording, TTY/TDDVoice dialing, Voice recording, TTY/TDD 
Availability
Officially announced18 Aug 2008  
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

18 Jul 200824 May 2007 
FCC ID value: JOYSCP-6750 linkFCC ID value: AEZSCP-6650 link 
FCC measured SAR

FCC measured SAR - The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value.

   
Head0.91 W/kg0.55 W/kg 
Measured in1900 MHz1900 MHz 
Body0.28 W/kg0.25 W/kg 
Measured in1900 MHz1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories