Market Status: Released
Add phone to compare
|Dimensions||3.54 x 1.77 x 0.78 inches (89.9 x 45 x 19.7 mm)|
|Weight||3.39 oz (96 g)|
the average is 4.4 oz (127 g)
|Design features||Numeric keypad, D-Pad|
|Physical size||1.9 inches|
|Resolution||176 x 220 pixels|
Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.
Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.
Additional display - Shows specs of the phone's additional display
Resolution - Refers to the width and the length od the additional display
|96 x 96 pixels|
|Physical Size||1.00 inches|
Colors - Shows the number of colors that the additional display supports
|Talk time||4.00 hours|
the average is 11 h (647 min)
|Stand-by time||10.4 days (250 hours)|
the average is 18 days (441 h)
|Type||Li - Ion|
|Camera||0.3 megapixels VGA|
|Features||Burst mode, Digital zoom, Self-timer|
|Supported formats||MP3, AAC, AAC+|
CDMA - Code Division Multiple Access. A technique of multiplexing, also called spread spectrum, in which analog signals are converted into digital form for transmission. For each communication channel, the signals are encoded in a sequence known to the transmitter and the receiver for that channel. The foremost application is digital cellular phone technology from QUALCOMM that operates in the 800MHz band and 1.9GHz PCS band. CDMA phones are noted for their excellent call quality and long battery life.
|800, 1900 MHz|
|Phonebook||500 entries, Caller groups, Multiple numbers per contact, Picture ID, Ring ID|
|Organizer||Calendar, Alarm, Calculator, Converter, World clock, Memo|
|Messaging||SMS, Predictive text input (T9)|
|Profiles||Advanced Audio Distribution (A2DP), Audio/Video Control Transport Protocol (AVCTP), Audio/Video Distribution Transport Protocol (AVDTP), Audio/Visual Remote Control Profile (AVRCP), Dial-up networking (DUN), File Transfer (FTP), Generic Access (GAP), Generic Audio/Video Distribution (GAVDP), Handsfree (HFP), Headset (HSP), Logical Link Control and Adaptation Protocol, Object Push (OPP), Phone Book Access (PBAP), Serial Port (SPP), Service Discovery Protocol (SDP)|
|Notifications||Music ringtones (MP3), Polyphonic ringtones (64 voices), Vibration, Silent mode, Speakerphone|
FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that that is sold in the U.S. has to be tested and approved for sale by the FCC.
Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission
|18 Dec 2009|
|FCC ID value: A3LSCHR312 link|
FCC measured SAR
FCC measured SAR - The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value.
|Measured in||1900 MHz|
|Measured in||1900 MHz|