x We have placed cookies on your device to make your experience better. Find more info here.

Samsung Monte Slider vs LG Viewty Snap Size compare

phone

Samsung Monte Slider Remove phone

Posted: 14 Feb 2010
Market Status: Released
phone

LG Viewty Snap Remove phone

Posted: 26 May 2010
Market Status: Released

Add phone to compare

Design
Device typeFeature phoneFeature phone 
Dimensions3.88 x 1.91 x 0.56 inches (98.5 x 48.5 x 14.35 mm)4.25 x 2.09 x 0.49 inches (108 x 53 x 12.5 mm) 
Weight3.02 oz (86 g)
the average is 5.3 oz (152 g)
3.14 oz (89 g)
the average is 5.3 oz (152 g)
 
Display
Physical size2.0 inches3.0 inches 
Resolution120 x 160 pixels240 x 400 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

100 ppi155 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio25.91 %44.70 % 
Camera
Camera1.3 megapixels5 megapixels 
Flash LED 
Features Autofocus 
Shooting ModesNight mode, Effects  
CamcorderYesYes 
Hardware
Processor

Processor - The processor is the main computing component of a phone and is a major factor when it comes to the overall speed of the device. Some more powerful smartphones use dual-core and quad-core processors designed to deliver greater performance.

 Single core, ARM9 
System memory

System memory - System memory, or RAM memory is the type of memory that the device uses to temporarily store data from the OS or currently-running apps. The more RAM available to the device, the better the performance will be when multiple or heavier programs are running.

 128 MB RAM / 256 MB ROM 
Built-in storage0.012 GB0.03 GB 
Storage expansionmicroSD, microSDHC up to 8 GBmicroSD, microSDHC up to 16 GB 
Battery
Talk time6.66 hours
the average is 14 h (870 min)
5.50 hours
the average is 14 h (870 min)
 
Stand-by time16.7 days (400 hours)
the average is 17 days (414 h)
16.2 days (390 hours)
the average is 17 days (414 h)
 
Capacity800 mAh900 mAh 
specifications continue after the ad
Multimedia
RadioFM, Recording optionFM 
Internet browsing
Built-in online services supportFacebookFacebook, Twitter 
Technology
GSM900, 1800 MHz850, 900, 1800, 1900 MHz 
DataEDGEEDGE 
Connectivity
Bluetooth2.12.1, EDR 
USBUSB 2.0USB 2.0 
Connector microUSB 
Features USB charging 
OtherComputer syncComputer sync 
Other features
NotificationsMusic ringtones (MP3), Polyphonic ringtones, Vibration, Phone profiles, Flight mode, SpeakerphoneHaptic feedback, Music ringtones (MP3), Polyphonic ringtones, Vibration, Silent mode, Speakerphone 
OtherVoice recordingVoice recording 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

 09 Apr 2010 
 FCC ID value: BEJGM360 link 
FCC measured SAR

FCC measured SAR - The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value.

   
Head 1.02 W/kg 
Measured in 1900 MHz 
Body 0.37 W/kg 
Measured in 1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories