x We have placed cookies on your device to make your experience better. Find more info here.

Samsung I7410 vs Samsung Beam I8520 Size compare

phone

Samsung I7410 Remove phone

Posted: 16 Feb 2009
Market Status: Released
phone

Samsung Beam I8520 Remove phone

Posted: 14 Feb 2010
Market Status: Released

Add phone to compare

Design
Device type Smart phone 
OS Android (2.1) 
Dimensions4.40 x 2.23 x 0.68 inches (111.7 x 56.7 x 17.2 mm)4.84 x 2.35 x 0.59 inches (123 x 59.8 x 14.9 mm) 
Weight 5.47 oz (155 g)
the average is 5.3 oz (152 g)
 
Display
Physical size3.2 inches3.7 inches 
Resolution240 x 400 pixels480 x 800 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

146 ppi252 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

AMOLEDSuper AMOLED 
Screen-to-body ratio46.04 %53.10 % 
Camera
Camera5 megapixels8 megapixels 
FlashYesLED 
FeaturesAutofocus, Digital image stabilization, Face detection, Smile detection, Digital zoomAutofocus 
Shooting ModesHigh Dynamic Range mode (HDR)  
Camcorder320x240 (QVGA) (15 fps)Yes 
Features Video calling 
Front-facing camera 0.3 megapixels VGA 
Hardware
Built-in storage0.15 GB  
Storage expansionmicroSD, microSDHCmicroSD, microSDHC up to 32 GB 
Battery
Talk time 14.16 hours
the average is 14 h (862 min)
 
Stand-by time 26.2 days (630 hours)
the average is 17 days (401 h)
 
Talk time (3G) 7.83 hours
the average is 15 h (906 min)
 
Stand-by time (3G) 22.1 days (530 hours)
the average is 24 days (570 h)
 
Capacity1440 mAh1800 mAh 
specifications continue after the ad
Multimedia
RadioFMFM, RDS 
Technology
GSM900, 1800, 1900 MHz850, 900, 1800, 1900 MHz 
UMTS2100 MHz900, 1900, 2100 MHz 
DataEDGE, UMTSEDGE, UMTS, HSDPA 7.2 Mbit/s, HSUPA 5.76 Mbit/s 
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

 A-GPS 
Navigation Yes 
Connectivity
Bluetooth2.13.0 
Wi-Fi 802.11 b, g, n 
USBUSB 2.0USB 2.0 
Connector microUSB 
OtherComputer syncDLNA, Computer sync, OTA sync 
Other features
NotificationsMusic ringtones (MP3), Vibration, Phone profiles, SpeakerphoneHaptic feedback, Music ringtones (MP3), Polyphonic ringtones, Vibration, Flight mode, Silent mode, Speakerphone 
Sensors Accelerometer 
ProjectorBuilt-inBuilt-in 
OtherVoice recordingVoice recording 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

 15 Jun 2010 
 FCC ID value: A3LGTI8520 link 
FCC measured SAR

FCC measured SAR - The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value.

   
Head 0.72 W/kg 
Measured in 1900 MHz 
Body 0.50 W/kg 
Measured in 1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories