x PhoneArena is hiring! Reviewer in the USA

Pantech Impact vs Samsung SGH-A107 Size compare


Pantech Impact Remove phone

Posted: 05 Oct 2009
Market Status: Released

Samsung SGH-A107 Remove phone

Posted: 19 Mar 2010
Market Status: Released

Add phone to compare

Device type Basic phone 
Dimensions4.19 x 2.04 x 0.70 inches (106 x 52 x 18 mm)3.46 x 1.73 x 0.78 inches (88 x 44 x 20 mm) 
Weight4.49 oz (127 g)
the average is 5.2 oz (150 g)
2.61 oz (74 g)
the average is 5.2 oz (150 g)
FeaturesTouch sensitive keypad, Full keyboard, Soft keysNumeric keypad, D-Pad 
Physical size2.6 inches2.0 inches 
Resolution240 x 400 pixels128 x 128 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

179 ppi91 ppi 

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

Screen-to-body ratio34.89 %33.41 % 
Additional display

Additional display - Shows specs of the phone's additional display

Camera2 megapixels  
Hardware FeaturesAutofocus  
Software FeaturesDigital zoom  
FeaturesVideo sharing  
Built-in storage0.08 GB  
Storage expansionmicroSD, microSDHC up to 32 GB  
Capacity930 mAh800 mAh 
TypeUser replaceable, Li - IonUser replaceable, Li - Ion 
Talk time5.00 hours
the average is 15 h (880 min)
3.00 hours
the average is 15 h (880 min)
Stand-by time14.0 days (336 hours)
the average is 16 days (375 h)
10.0 days (240 hours)
the average is 16 days (375 h)
specifications continue after the ad
Music player   
FeaturesMusic recognition  
GSM850, 900, 1800, 1900 MHz850, 1900 MHz 
UMTS850, 1900 MHz  
DataUMTS, HSDPA 3.6 Mbit/s  
Phone features
NotificationsMusic ringtones (MP3), Vibration, Phone profiles, SpeakerphoneMusic ringtones (MP3), Polyphonic ringtones (40 voices), Vibration, Silent mode, Speakerphone 
Hearing aid compatibility M3, T3 
Other featuresVoice dialing, Voice commands, Voice recording, TTY/TDD  
Bluetooth2.0, EDR  
Officially announced05 Oct 2009  
Shopping information
MSRP price $ 80 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

10 Jul 200918 Mar 2010 
FCC ID value: JYCP7000 linkFCC ID value: A3LSGHA107 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

Head0.92 W/kg0.74 W/kg 
Measured in1900 MHz1900 MHz 
Body0.71 W/kg0.64 W/kg 
Measured in1900 MHz1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories