x We have placed cookies on your device to make your experience better. Find more info here.

Nokia Nuron 4G vs Nokia N950 Size compare

phone

Nokia Nuron 4G Remove phone

Posted: 18 May 2011
Market Status: Not officially announced
phone

Nokia N950 Remove phone

Posted: 05 Oct 2010
Market Status: Released

Add phone to compare

Design
Device typeSmart phoneSmart phone 
OSSymbianMeeGo 
Display
Physical size3.2 inches4.0 inches 
Resolution360 x 640 pixels480 x 854 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

229 ppi245 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
FeaturesLight sensor, Proximity sensorLight sensor, Proximity sensor 
Camera
Camera5 megapixels8 megapixels 
Flash Dual LED 
FeaturesDigital zoomAutofocus 
SettingsExposure compensation, White balance presets  
CamcorderYes1280x720 (720p HD) (30 fps) 
Features Video calling 
Front-facing camera Yes 
Hardware
Storage expansionmicroSD, microSDHCmicroSD, microSDHC 
Battery
Capacity 1320 mAh 
specifications continue after the ad
Multimedia
RadioFM, Stereo, RDSYes 
Technology
GSM850, 900, 1800, 1900 MHz850, 900, 1800, 1900 MHz 
UMTS1700/2100, 2100 MHz850, 900, 1700/2100, 1900, 2100 MHz 
DataEDGE, UMTS, HSDPA 14.4 Mbit/s, HSUPA 2 Mbit/sHSDPA 14.4 Mbit/s, HSUPA 5.76 Mbit/s, UMTS, EDGE 
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

A-GPSA-GPS 
NavigationYesYes 
Connectivity
BluetoothYes2.1, EDR 
Wi-FiYes802.11 b, g, n 
USBUSB 2.0Yes 
ConnectormicroUSB  
FeaturesMass storage device  
OtherComputer syncComputer sync, OTA sync 
Other features
NotificationsService lights, Music ringtones (MP3), Polyphonic ringtones, Vibration, Phone profiles, SpeakerphoneHaptic feedback, Music ringtones (MP3), Polyphonic ringtones, Vibration, Flight mode, Silent mode, Speakerphone 
SensorsAccelerometerAccelerometer, Compass 
OtherVoice dialing, Voice commands, Voice recordingVoice recording 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

 11 May 2011 
 FCC ID value: LJPRM-680 link 
FCC measured SAR

FCC measured SAR - The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value.

   
Head 0.80 W/kg 
Measured in 1900 MHz 
Body 1.24 W/kg 
Measured in 850 MHz 

To see the full specifications with in-depth details click here.

Latest stories