x PhoneArena is hiring! Reviewer in the USA

Nokia 5165 vs Samsung Galaxy Ace Plus Size compare

phone

Nokia 5165 Remove phone

Posted: 27 Jul 1998
Market Status: Released
phone

Samsung Galaxy Ace Plus Remove phone

Posted: 03 Jan 2012
Market Status: Released

Add phone to compare

Design
Device type Smart phone 
OS Android (2.3.6) 
Dimensions5.10 x 1.90 x 1.00 inches (130 x 48 x 25 mm)4.52 x 2.46 x 0.44 inches (114.7 x 62.5 x 11.2 mm) 
Weight5.90 oz (167 g)
the average is 5.3 oz (151 g)
4.06 oz (115 g)
the average is 5.3 oz (151 g)
 
FeaturesExchangable faceplates, Numeric keypad, Soft keys  
Display
Physical size 3.6 inches 
Resolution 320 x 480 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

 158 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

 TFT 
Screen-to-body ratio 55.30 % 
Features Proximity sensor 
Camera
Camera 5 megapixels 
Flash LED 
Aperture size

Aperture size - The aperture of a camera is the opening through which light travels before it reaches the camera sensor. The smaller the number is, the bigger this opening is, allowing for more light to pass.

 F2.6 
Hardware Features Autofocus 
Software Features Smile detection 
Settings White balance presets 
Shooting Modes Burst mode, Panorama, Effects 
Camcorder 640x480 (VGA) (30 fps) 
Hardware
System chip

System chip - Most modern handsets use an advanced chip that includes many of the device’s hardware modules like the processor, Wi-Fi, Bluetooth and sometimes even the wireless radio. This field shows what particular system chip (or System-on-a-Chip) is used in the phone.

 Qualcomm Snapdragon S1 MSM7227A 
Processor

Processor - The processor is the main computing component of a phone and is a major factor when it comes to the overall speed of the device. Some more powerful smartphones use dual-core and quad-core processors designed to deliver greater performance.

 Single core, 1000 MHz, ARM Cortex-A5 
Graphics processor Adreno 200 (enhanced) 
System memory

System memory - System memory, or RAM memory is the type of memory that the device uses to temporarily store data from the OS or currently-running apps. The more RAM available to the device, the better the performance will be when multiple or heavier programs are running.

 0.5 GB RAM 
Built-in storage 3 GB 
Storage expansion microSD, microSDHC up to 32 GB 
Battery
Capacity900 mAh1300 mAh 
TypeUser replaceable, Ni - MHUser replaceable, Li - Ion 
Talk time3.25 hours
the average is 14 h (857 min)
11.16 hours
the average is 14 h (857 min)
 
Stand-by time8.0 days (192 hours)
the average is 15 days (370 h)
27.5 days (660 hours)
the average is 15 days (370 h)
 
Talk time (3G) 7.33 hours
the average is 17 h (997 min)
 
Stand-by time (3G) 17.5 days (420 hours)
the average is 20 days (485 h)
 
specifications continue after the ad
Multimedia
Mirroring DLNA 
Music player   
Filter by Album, Artist, Playlists 
Features Album art cover, Background playback 
Radio FM, Stereo, RDS 
Speakers Earpiece, Loudspeaker 
Cellular
GSM 850, 900, 1800, 1900 MHz 
UMTS 900, 2100 MHz 
AMPS

AMPS - Advanced mobile phone standard. Analogue standard used widely in North America.

800 MHz  
TDMA

TDMA - Time Division Multiple Access. A multiplexing technology used with satellites and cellular phones, in which multiple channels of data are interleaved (each signal is assigned to a different time interval, and the signals are transmitted by taking turns). . For cellular, TDMA triples the capacity of the original analog method. The GSM cellular system is also based on TDMA, but GSM defines the entire network, not just the air interface.

800, 1900 MHz  
Data HSDPA 7.2 Mbit/s, UMTS 
Phone features
Sensors Accelerometer, Compass 
NotificationsPhone profilesHaptic feedback, Music ringtones (MP3), Polyphonic ringtones (64 voices), Vibration, Flight mode, Silent mode, Speakerphone 
Other features Voice dialing, Voice commands, Voice recording 
Connectivity
Bluetooth 3.0 
Wi-Fi 802.11 b, g, n 
USB USB 2.0 
Connector microUSB 
Features Mass storage device, USB charging 
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

 A-GPS 
Navigation Yes 
Other Computer sync, OTA sync 
Availability
Officially announced 03 Jan 2012 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

27 Jul 199827 Dec 2011 
FCC ID value: LJPNSW-1NX linkFCC ID value: A3LGTS7500 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head 0.49 W/kg 
Body 0.60 W/kg 
Product Specific Use 0.60 W/kg 
Simultaneous Transmission 0.67 W/kg 
EU SAR   
Head 0.83 W/kg 

To see the full specifications with in-depth details click here.

Latest stories