x PhoneArena is hiring! Reviewer in the USA

Nokia 3360 vs Nokia 6131 NFC Size compare

phone

Nokia 3360 Remove phone

Posted: 03 May 2001
Market Status: Released
phone

Nokia 6131 NFC Remove phone

Posted: 10 Jan 2007
Market Status: Released

Add phone to compare

Design
Dimensions4.50 x 2.00 x 1.00 inches (114 x 51 x 25 mm)3.62 x 1.88 x 0.78 inches (92 x 48 x 20 mm) 
Weight4.80 oz (136 g)
the average is 5.3 oz (151 g)
3.66 oz (104 g)
the average is 5.3 oz (151 g)
 
FeaturesExchangable faceplates, Numeric keypad, Soft keysNumeric keypad, Soft keys 
Display
Physical size 2.2 inches 
Resolution 240 x 320 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

 182 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

 TFT 
Screen-to-body ratio 34.14 % 
Additional display

Additional display - Shows specs of the phone's additional display

 TFT 
Resolution

Resolution - Refers to the width and the length od the additional display

 128 x 160 pixels 
Physical Size 1.36 inches 
Colors

Colors - Shows the number of colors that the additional display supports

 262 144 
Camera
Camera 1.3 megapixels 
Software Features Digital zoom 
Camcorder 220x176 
Hardware
Built-in storage 0.011 GB 
Storage expansion microSD 
Battery
Capacity600 mAh860 mAh 
User replaceableYesYes 
Talk time3.50 hours
the average is 14 h (838 min)
3.40 hours
the average is 14 h (838 min)
 
Stand-by time10.5 days (252 hours)
the average is 16 days (389 h)
10.0 days (240 hours)
the average is 16 days (389 h)
 
specifications continue after the ad
Multimedia
Radio FM, Stereo, Visual Radio 
Cellular
GSM 850, 900, 1800, 1900 MHz 
AMPS

AMPS - Advanced mobile phone standard. Analogue standard used widely in North America.

800 MHz  
TDMA

TDMA - Time Division Multiple Access. A multiplexing technology used with satellites and cellular phones, in which multiple channels of data are interleaved (each signal is assigned to a different time interval, and the signals are transmitted by taking turns). . For cellular, TDMA triples the capacity of the original analog method. The GSM cellular system is also based on TDMA, but GSM defines the entire network, not just the air interface.

800, 1900 MHz  
Phone features
NotificationsVibration, Phone profilesMusic ringtones (MP3), Polyphonic ringtones (64 voices), Vibration, Phone profiles, Speakerphone 
Other features Voice dialing, Voice commands, Voice recording, Push-to-Talk 
Connectivity
Bluetooth 2.0 
USB Yes 
Connector Proprietary 
OtherComputer sync, InfraredNFC, Infrared, SyncML 
Availability
Officially announced 07 Jan 2007 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

03 May 200106 Feb 2007 
FCC ID value: LJPNPW-1NB linkFCC ID value: PYARM-216V link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head 1.23 W/kg 
Measured in 1900 MHz 
Body 0.36 W/kg 
Measured in 1900 MHz 
EU SAR   
Head 0.96 W/kg 

To see the full specifications with in-depth details click here.

Latest stories