x PhoneArena is hiring! Reviewer in the USA

Motorola i440

phone

Motorola i440 Remove phone

Posted: 30 May 2011
Market Status: Released

Add phone to compare

Design
Device typeBasic phone  
Dimensions3.82 x 2.01 x 0.98 inches (97 x 51 x 25 mm)  
Weight4.49 oz (127 g)
the average is 5.3 oz (150 g)
  
FeaturesNumeric keypad, Soft keys, D-Pad  
Display
Physical size1.8 inches  
Resolution128 x 160 pixels  
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

114 ppi  
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFT  
Screen-to-body ratio20.36 %  
Additional display

Additional display - Shows specs of the phone's additional display

Yes  
Resolution

Resolution - Refers to the width and the length od the additional display

32 x 96 pixels  
Camera
Camera0.3 megapixels VGA  
Software FeaturesDigital zoom  
CamcorderYes  
Battery
User replaceableYes  
Talk time7.00 hours
the average is 14 h (835 min)
  
Stand-by time6.2 days (150 hours)
the average is 16 days (390 h)
  
Multimedia
RadioFM  
specifications continue after the ad
Cellular
iDEN

iDEN - iDEN (Integrated Digital Enhanced Network) is a wireless network standard developed by Motorola and used by Nextel Wireless. It operates at 800Mhz, 900Mhz and 1500Mhz frequency bands and it is a mixture of TDMA (Time Division Multiple Access) and GSM arhitecture. It allows the use of one mobile device as a digital phone, pager, two-way radio and fax/modem.

800, 900 MHz  
Phone features
NotificationsMusic ringtones (MP3), Polyphonic ringtones, Vibration, Flight mode, Silent mode, Speakerphone  
Hearing aid compatibilityM3, T4  
Other featuresVoice recording, TTY/TDD, Push-to-Talk  
Connectivity
Bluetooth2.0, EDR  
USBUSB 2.0  
ConnectormicroUSB  
FeaturesUSB charging  
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

GPS, A-GPS  
NavigationYes  
Availability
Officially announced08 Aug 2011  
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

07 Apr 2011  
FCC ID value: IHDT56MN1 link  
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head1.31 W/kg  
Body0.57 W/kg  

To see the full specifications with in-depth details click here.

Latest stories