x We have placed cookies on your device to make your experience better. Find more info here.

Motorola i420 vs Motorola i412 Size compare

phone

Motorola i420 Remove phone

Posted: 02 May 2011
Market Status: Released
phone

Motorola i412 Remove phone

Posted: 16 May 2011
Market Status: Released

Add phone to compare

Design
Device typeFeature phoneBasic phone 
Dimensions 3.80 x 1.93 x 0.79 inches (96.5 x 49 x 20 mm) 
Weight 3.70 oz (105 g)
the average is 5.3 oz (152 g)
 
Display
Physical size 1.8 inches 
Resolution 128 x 160 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

 114 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

 TFT 
Screen-to-body ratio 21.31 % 
Additional display

Additional display - Shows specs of the phone's additional display

Yes  
Camera
CameraYes0.3 megapixels VGA 
Features Digital zoom 
Hardware
Built-in storage 0.005 GB 
Battery
Talk time 3.40 hours
the average is 14 h (862 min)
 
Stand-by time 4.0 days (96 hours)
the average is 17 days (401 h)
 
Capacity 1130 mAh 
specifications continue after the ad
Multimedia
RadioFM  
SpeakersEarpiece, Loudspeaker  
Technology
iDEN

iDEN - iDEN (Integrated Digital Enhanced Network) is a wireless network standard developed by Motorola and used by Nextel Wireless. It operates at 800Mhz, 900Mhz and 1500Mhz frequency bands and it is a mixture of TDMA (Time Division Multiple Access) and GSM arhitecture. It allows the use of one mobile device as a digital phone, pager, two-way radio and fax/modem.

800, 900 MHz800, 900 MHz 
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

 GPS 
Navigation Yes 
Connectivity
Bluetooth2.0, EDR2.0 
USBUSB 2.0USB 2.0 
ConnectormicroUSBmicroUSB 
FeaturesUSB chargingUSB charging 
OtherComputer syncComputer sync 
Other features
NotificationsMusic ringtones (MP3), Polyphonic ringtones, Vibration, Phone profiles, Flight mode, Silent mode, SpeakerphoneMusic ringtones (MP3, WAV, MIDI), Polyphonic ringtones, Vibration, Flight mode, Silent mode, Speakerphone 
Hearing aid compatibilityM4, T4  
OtherVoice dialing, Voice recording, Push-to-TalkVoice dialing, Voice recording, Push-to-Talk 
Availability
Officially announced 13 May 2011 
Shopping information
MSRP price $ 70 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

14 Mar 2011  
FCC ID value: IHDT56MR1 link  
FCC measured SAR

FCC measured SAR - The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value.

   
Head0.94 W/kg  
Body0.90 W/kg  

To see the full specifications with in-depth details click here.

Latest stories