x PhoneArena is hiring! Reviewer in the USA

Motorola WILDER vs LG A200 Size compare

phone

Motorola WILDER Remove phone

Posted: 08 Jun 2011
Market Status: Released
phone

LG A200 Remove phone

Posted: 18 May 2011
Market Status: Released

Add phone to compare

Design
Device typeFeature phoneFeature phone 
Dimensions4.02 x 2.28 x 0.53 inches (102 x 58 x 13.4 mm)3.93 x 2.01 x 0.62 inches (99.8 x 51 x 15.8 mm ) 
Weight 3.35 oz (95 g)
the average is 5.3 oz (150 g)
 
Features Numeric keypad, Soft keys, D-Pad 
RuggedSplash, Dust resistant  
Colors Black 
Display
Physical size2.8 inches2.2 inches 
Resolution240 x 320 pixels176 x 220 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

143 ppi128 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTLCD 
Screen-to-body ratio41.06 %29.89 % 
Additional display

Additional display - Shows specs of the phone's additional display

OLED  
Resolution

Resolution - Refers to the width and the length od the additional display

96 x 16 pixels  
Camera
Camera2 megapixels2 megapixels 
Software FeaturesDigital zoomDigital zoom 
CamcorderResolution, 176 x 144 pixelsYes 
Hardware
System chip

System chip - Most modern handsets use an advanced chip that includes many of the device’s hardware modules like the processor, Wi-Fi, Bluetooth and sometimes even the wireless radio. This field shows what particular system chip (or System-on-a-Chip) is used in the phone.

Qualcomm ESC6240  
Processor

Processor - The processor is the main computing component of a phone and is a major factor when it comes to the overall speed of the device. Some more powerful smartphones use dual-core and quad-core processors designed to deliver greater performance.

Single core, Qualcomm ESC6240Single core, ARM11 
System memory

System memory - System memory, or RAM memory is the type of memory that the device uses to temporarily store data from the OS or currently-running apps. The more RAM available to the device, the better the performance will be when multiple or heavier programs are running.

GB RAM / 128 MB ROM GB RAM / 128 MB ROM 
Built-in storage0.005 GB  
Storage expansionmicroSD, microSDHC up to 32 GBmicroSD, microSDHC up to 8 GB 
Battery
Capacity910 mAh  
TypeUser replaceable, Li - IonUser replaceable, Li - Ion 
Talk time9.60 hours
the average is 15 h (876 min)
  
Stand-by time10.6 days (255 hours)
the average is 16 days (377 h)
  
specifications continue after the ad
Multimedia
RadioFMFM 
Cellular
GSM900, 1800 MHz850, 900, 1800, 1900 MHz 
Phone features
NotificationsHaptic feedback, Music ringtones (MP3), Polyphonic ringtones, Vibration, Flight mode, Silent mode, SpeakerphoneMusic ringtones (MP3), Polyphonic ringtones, Vibration, Flight mode, Silent mode, Speakerphone 
Other featuresVoice recordingVoice recording 
Connectivity
Bluetooth2.1, EDR2.1, EDR 
USBUSB 2.0USB 2.0 
ConnectormicroUSBmicroUSB 
FeaturesMass storage device, USB chargingUSB charging 
Other Computer sync 
Availability
Officially announced08 Jun 2011  
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

 22 Mar 2011 
 FCC ID value: BEJA200 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head 0.60 W/kg 
Measured in 850 MHz 
Body 0.44 W/kg 
Measured in 850 MHz 

To see the full specifications with in-depth details click here.

Latest stories