x We have placed cookies on your device to make your experience better. Find more info here.

Motorola W403 vs Motorola i418 Size compare

phone

Motorola W403 Remove phone

Posted: 28 Aug 2009
Market Status: Released
phone

Motorola i418 Remove phone

Posted: 06 Dec 2012
Market Status: Released

Add phone to compare

Design
Device typeBasic phoneBasic phone 
Dimensions3.74 x 1.81 x 0.63 inches (95 x 46 x 16 mm)4.61 x 2.01 x 0.51 inches (117 x 51 x 13 mm) 
Weight2.68 oz (76 g)
the average is 5.3 oz (152 g)
3.02 oz (86 g)
the average is 5.3 oz (152 g)
 
Rugged Dust, Shock, Vibration, Temperature, Humidity resistant 
Display
Physical size1.8 inches2.2 inches 
Resolution128 x 160 pixels240 x 320 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

114 ppi182 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio23.35 %25.07 % 
Additional display

Additional display - Shows specs of the phone's additional display

Yes  
Resolution

Resolution - Refers to the width and the length od the additional display

32 x 96 pixels  
Physical Size0.97 inches  
Camera
Camera0.3 megapixels VGA2 megapixels 
CamcorderYes  
Hardware
Built-in storage0.0045 GB  
Storage expansionmicroSD up to 2 GBmicroSD 
Battery
Talk time8.33 hours
the average is 14 h (862 min)
5.60 hours
the average is 14 h (862 min)
 
Stand-by time12.5 days (300 hours)
the average is 17 days (401 h)
7.9 days (190 hours)
the average is 17 days (401 h)
 
Capacity910 mAh  
specifications continue after the ad
Multimedia
RadioFMFM 
Speakers Earpiece 
Technology
GSM850, 1900 MHz  
DataGPRS  
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

 GPS 
Connectivity
Bluetooth2.0, EDRYes 
USBUSB 2.0Yes 
ConnectormicroUSBmicroUSB 
FeaturesMass storage deviceMass storage device, USB charging 
Other features
NotificationsMusic ringtones, Polyphonic ringtones, Vibration, Flight mode, SpeakerphoneMusic ringtones, Vibration 
Hearing aid compatibility M3 
OtherVoice recordingVoice dialing, Voice recording 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

24 Jul 2009  
FCC ID value: IHDP56KP1 link  
FCC measured SAR

FCC measured SAR - The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value.

   
Head0.32 W/kg  
Measured in1900 MHz  
Body0.37 W/kg  
Measured in1900 MHz  

To see the full specifications with in-depth details click here.

Latest stories