x PhoneArena is hiring! Reviewer in the USA

Motorola W375 vs Motorola W403 Size compare

phone

Motorola W375 Remove phone

Posted: 28 Jun 2006
Market Status: Released
phone

Motorola W403 Remove phone

Posted: 28 Aug 2009
Market Status: Released

Add phone to compare

Design
Device type Basic phone 
Dimensions3.90 x 1.77 x 0.73 inches (99 x 45 x 18.6 mm)3.74 x 1.81 x 0.63 inches (95 x 46 x 16 mm) 
Weight3.10 oz (88 g)
the average is 5.3 oz (151 g)
2.68 oz (76 g)
the average is 5.3 oz (151 g)
 
FeaturesNumeric keypad, Soft keysNumeric keypad, D-Pad, Soft keys 
Display
Physical size 1.8 inches 
Resolution128 x 160 pixels128 x 160 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

 114 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio 23.35 % 
Additional display

Additional display - Shows specs of the phone's additional display

 Yes 
Resolution

Resolution - Refers to the width and the length od the additional display

 32 x 96 pixels 
Physical Size 0.97 inches 
Camera
Camera0.3 megapixels VGA0.3 megapixels VGA 
Camcorder Yes 
Hardware
Built-in storage0.0013 GB0.0045 GB 
Storage expansion microSD up to 2 GB 
Battery
Capacity850 mAh910 mAh 
User replaceableYesYes 
Talk time7.50 hours
the average is 14 h (838 min)
8.33 hours
the average is 14 h (838 min)
 
Stand-by time10.4 days (250 hours)
the average is 16 days (389 h)
12.5 days (300 hours)
the average is 16 days (389 h)
 
specifications continue after the ad
Multimedia
RadioFMFM 
Cellular
GSM850, 1800, 1900 MHz850, 1900 MHz 
OtherOther version supports GSM 900/1800/1900 MHz  
Phone features
NotificationsMusic ringtones (MP3), Vibration, Phone profiles, SpeakerphoneMusic ringtones, Polyphonic ringtones, Vibration, Flight mode, Speakerphone 
Other featuresTTY/TDDVoice recording 
Connectivity
Bluetooth 2.0, EDR 
USBYesUSB 2.0 
ConnectorminiUSBmicroUSB 
Features Mass storage device 
OtherComputer sync  
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

13 Oct 200624 Jul 2009 
FCC ID value: IHDT56GM1 linkFCC ID value: IHDP56KP1 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head0.54 W/kg0.32 W/kg 
Measured in1900 MHz1900 MHz 
Body0.27 W/kg0.37 W/kg 
Measured in1900 MHz1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories