x PhoneArena is hiring! Reviewer in the USA

Motorola W375 vs LG A250 Size compare

phone

Motorola W375 Remove phone

Posted: 28 Jun 2006
Market Status: Released
phone

LG A250 Remove phone

Posted: 04 Apr 2011
Market Status: Released

Add phone to compare

Design
Device type Basic phone 
Dimensions3.90 x 1.77 x 0.73 inches (99 x 45 x 18.6 mm)3.93 x 2.01 x 0.62 inches (99.8 x 51 x 15.8 mm) 
Weight3.10 oz (88 g)
the average is 5.2 oz (150 g)
3.25 oz (92 g)
the average is 5.2 oz (150 g)
 
FeaturesNumeric keypad, Soft keys  
Display
Physical size 2.2 inches 
Resolution128 x 160 pixels176 x 220 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

 128 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio 29.89 % 
Additional display

Additional display - Shows specs of the phone's additional display

 Yes 
Resolution

Resolution - Refers to the width and the length od the additional display

 96 x 64 pixels 
Physical Size 1.00 inches 
Camera
Camera0.3 megapixels VGA1.3 megapixels 
Software Features Digital zoom 
Camcorder 220x176 (15 fps) 
Hardware
Built-in storage0.0013 GB0.01 GB 
Storage expansion microSD, microSDHC up to 8 GB 
Battery
Capacity850 mAh900 mAh 
TypeUser replaceable, Li - IonUser replaceable, Li - Ion 
Talk time7.50 hours
the average is 15 h (886 min)
4.00 hours
the average is 15 h (886 min)
 
Stand-by time10.4 days (250 hours)
the average is 16 days (377 h)
4.2 days (100 hours)
the average is 16 days (377 h)
 
specifications continue after the ad
Multimedia
RadioFMFM 
Cellular
GSM850, 1800, 1900 MHz850, 900, 1800, 1900 MHz 
OtherOther version supports GSM 900/1800/1900 MHz  
Phone features
NotificationsMusic ringtones (MP3), Vibration, Phone profiles, SpeakerphoneMusic ringtones, Polyphonic ringtones (64 voices), Vibration, Silent mode, Speakerphone 
Other featuresTTY/TDDVoice recording 
Connectivity
Bluetooth 2.1 
USBYesUSB 2.0 
ConnectorminiUSB  
OtherComputer syncComputer sync 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

13 Oct 200601 Apr 2011 
FCC ID value: IHDT56GM1 linkFCC ID value: BEJA250 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head0.54 W/kg0.32 W/kg 
Measured in1900 MHz850 MHz 
Body0.27 W/kg0.94 W/kg 
Measured in1900 MHz850 MHz 
EU SAR   
Head 0.82 W/kg 

To see the full specifications with in-depth details click here.

Latest stories