x PhoneArena is hiring! Reviewer in the USA

Motorola SLVR L9 vs Motorola MOTOZINE ZN5 Size compare


Motorola SLVR L9 Remove phone

Posted: 13 Feb 2007
Market Status: Released

Motorola MOTOZINE ZN5 Remove phone

Posted: 23 Jun 2008
Market Status: Released

Add phone to compare

Device type Smart phone 
OS Linux 
Dimensions4.46 x 1.92 x 0.45 inches (113.5 x 49 x 11.5 mm)4.65 x 1.99 x 0.63 inches (118 x 50.5 x 16 mm) 
Weight3.38 oz (96 g)
the average is 5.2 oz (149 g)
4.02 oz (114 g)
the average is 5.2 oz (149 g)
FeaturesNumeric keypad, Soft keysNumeric keypad, Soft keys 
Physical size2.0 inches2.4 inches 
Resolution176 x 220 pixels240 x 320 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

141 ppi167 ppi 

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

Screen-to-body ratio22.79 %29.88 % 
Camera2 megapixels5 megapixels 
Flash Xenon 
Aperture size

Aperture size - The aperture of a camera is the opening through which light travels before it reaches the camera sensor. The smaller the number is, the bigger this opening is, allowing for more light to pass.

Hardware Features Autofocus 
Software FeaturesDigital zoom  

Processor - The processor is the main computing component of a phone and is a major factor when it comes to the overall speed of the device. Some more powerful smartphones use dual-core and quad-core processors designed to deliver greater performance.

 500 MHz 
System memory

System memory - System memory, or RAM memory is the type of memory that the device uses to temporarily store data from the OS or currently-running apps. The more RAM available to the device, the better the performance will be when multiple or heavier programs are running.

  GB RAM / 128 MB ROM 
Built-in storage0.02 GB0.146 GB 
Storage expansionmicroSDmicroSD up to 4 GB 
Capacity880 mAh950 mAh 
TypeUser replaceable, Li - IonUser replaceable, Li - Ion 
Talk time6.66 hours
the average is 15 h (874 min)
5.50 hours
the average is 15 h (874 min)
Stand-by time14.6 days (350 hours)
the average is 15 days (365 h)
19.0 days (456 hours)
the average is 15 days (365 h)
specifications continue after the ad
Mirroring TV-out 
GSM850, 900, 1800, 1900 MHz850, 900, 1800, 1900 MHz 
Phone features
NotificationsMusic ringtones (MP3), Vibration, Phone profiles, SpeakerphoneMusic ringtones (MP3), Polyphonic ringtones, Vibration, Phone profiles, Silent mode, Speakerphone 
Other featuresVoice recording, Push-to-TalkVoice dialing, Voice recording 
Wi-Fi 802.11 b, g, a 
USBYesUSB 2.0 
OtherComputer sync  
Officially announced12 Feb 200723 Jun 2008 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

 30 Jun 2008 
 FCC ID value: IHDT56JT1 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

Head 1.54 W/kg 
Measured in 1900 MHz 
Body 1.12 W/kg 
Measured in 1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories