x PhoneArena is hiring! Reviewer in the USA

Motorola SLVR L7 vs Motorola RAZR2 V8 Size compare

phone

Motorola SLVR L7 Remove phone

Posted: 16 Feb 2005
Market Status: Released
phone

Motorola RAZR2 V8 Remove phone

Posted: 15 May 2007
Market Status: Released

Add phone to compare

Design
Device type Smart phone 
OS Linux 
Dimensions4.47 x 1.93 x 0.45 inches (113.5 x 49 x 11.5 mm)4.05 x 2.08 x 0.46 inches (103 x 53 x 11.9 mm) 
Weight3.50 oz (99 g)
the average is 5.3 oz (150 g)
4.12 oz (117 g)
the average is 5.3 oz (150 g)
 
FeaturesNumeric keypad, Soft keysNumeric keypad, Music control keys, Soft keys 
Display
Physical size 2.2 inches 
Resolution176 x 220 pixels240 x 320 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

 182 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio 27.58 % 
Additional display

Additional display - Shows specs of the phone's additional display

 TFT 
Resolution

Resolution - Refers to the width and the length od the additional display

 240 x 320 pixels 
Physical Size 2.00 inches 
Colors

Colors - Shows the number of colors that the additional display supports

 262 144 
Camera
Camera0.3 megapixels VGA2 megapixels 
Software FeaturesDigital zoomDigital zoom 
Shooting Modes Burst mode 
CamcorderYes220x176 
Hardware
Processor

Processor - The processor is the main computing component of a phone and is a major factor when it comes to the overall speed of the device. Some more powerful smartphones use dual-core and quad-core processors designed to deliver greater performance.

 Single core, 500 MHz, ARM II 
Built-in storage0.005 GB2 GB 
Storage expansionmicroSD  
Battery
Capacity820 mAh770 mAh 
User replaceableYesYes 
Talk time6.66 hours
the average is 14 h (835 min)
8.33 hours
the average is 14 h (835 min)
 
Stand-by time14.6 days (350 hours)
the average is 16 days (390 h)
11.7 days (280 hours)
the average is 16 days (390 h)
 
specifications continue after the ad
Multimedia
SpeakersEarpiece, Loudspeaker  
Cellular
GSM850, 900, 1800, 1900 MHz850, 900, 1800, 1900 MHz 
Phone features
NotificationsMusic ringtones (MP3), Vibration, Phone profiles, SpeakerphoneMusic ringtones (MP3), Vibration, Phone profiles, Speakerphone 
Other featuresVoice dialing, TTY/TDD, Push-to-TalkVoice dialing (Speaker independent), Voice recording, TTY/TDD 
Connectivity
Bluetooth1.22.0 
USBYesUSB 2.0 
ConnectorminiUSBmicroUSB 
OtherComputer syncComputer sync 
Availability
Officially announced14 Feb 200515 May 2007 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

13 Oct 200515 May 2007 
FCC ID value: IHDT56FP1 linkFCC ID value: IHDT56HZ1 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head1.16 W/kg0.30 W/kg 
Measured in1900 MHz1900 MHz 
Body0.38 W/kg0.34 W/kg 
Measured in1900 MHz1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories