x We have placed cookies on your device to make your experience better. Find more info here.

Motorola RAZR2 V9 vs Samsung SGH-G400 Size compare

phone

Motorola RAZR2 V9 Remove phone

Posted: 15 May 2007
Market Status: Released
phone

Samsung SGH-G400 Remove phone

Posted: 04 Mar 2008
Market Status: Released

Add phone to compare

Design
Dimensions4.05 x 2.08 x 0.52 inches (103 x 53 x 13.3 mm)4.05 x 2.02 x 0.59 inches (103 x 51.5 x 15 mm) 
Weight4.40 oz (125 g)
the average is 5.3 oz (152 g)
4.06 oz (115 g)
the average is 5.3 oz (152 g)
 
Display
Physical size2.2 inches2.2 inches 
Resolution240 x 320 pixels240 x 320 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

182 ppi180 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio27.58 %28.92 % 
Additional display

Additional display - Shows specs of the phone's additional display

TFTTFT 
Resolution

Resolution - Refers to the width and the length od the additional display

240 x 320 pixels240 x 320 pixels 
Physical Size2.00 inches2.22 inches 
Colors

Colors - Shows the number of colors that the additional display supports

262 144262 144 
Touch screen Yes 
Camera
Camera2 megapixels5 megapixels 
Flash Yes 
FeaturesDigital zoomAutofocus, Digital image stabilization, Face detection, Smile detection 
Shooting ModesBurst modeHigh Dynamic Range mode (HDR) 
Camcorder220x176Yes 
FeaturesVideo callingVideo calling 
Hardware
Built-in storage0.045 GB0.104 GB 
Storage expansionmicroSDmicroSD 
Battery
Talk time3.40 hours
the average is 14 h (870 min)
3.50 hours
the average is 14 h (870 min)
 
Stand-by time10.8 days (260 hours)
the average is 17 days (414 h)
15.0 days (360 hours)
the average is 17 days (414 h)
 
Talk time (3G)3.00 hours
the average is 15 h (927 min)
  
Stand-by time (3G)12.3 days (295 hours)
the average is 24 days (584 h)
  
Capacity950 mAh880 mAh 
specifications continue after the ad
Multimedia
Radio FM, RDS 
Internet browsing
Browser Access NetFront 3.4 Browser, RSS Feeds 
Technology
GSM850, 900, 1800, 1900 MHz900, 1800, 1900 MHz 
UMTS850, 1900 MHz2100 MHz 
OtherEuropean version supports UMTS 2100 MHz instead of 850/1900  
DataHSDPA 3.6 Mbit/s, UMTS, EDGEEDGE, UMTS, HSDPA 7.2 Mbit/s 
Connectivity
Bluetooth2.02.0 
USBUSB 2.0USB 2.0 
ConnectormicroUSB  
OtherComputer syncComputer sync 
Other features
NotificationsMusic ringtones (MP3), Polyphonic ringtones, Vibration, Phone profiles, SpeakerphoneMusic ringtones (MP3), Vibration, Phone profiles, Speakerphone 
OtherVoice dialing (Speaker independent), Voice recording, TTY/TDDVoice recording 
Availability
Officially announced15 May 200704 Mar 2008 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

29 Jun 200704 May 2008 
FCC ID value: IHDT56HN1 linkFCC ID value: A3LSGHG400 link 
FCC measured SAR

FCC measured SAR - The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value.

   
Head0.26 W/kg0.20 W/kg 
Measured in1900 MHz1900 MHz 
Body0.42 W/kg0.51 W/kg 
Measured in1900 MHz1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories