Motorola RAZR V3a vs OPPO Find 5 Size compare
Market Status: Released
Market Status: Released
Add phone to compare
|Device type||Smart phone|
|Dimensions||3.85 x 2.06 x 0.53 inches (98 x 53 x 13.5 mm)||5.58 x 2.71 x 0.35 inches (141.8 x 68.8 x 8.9 mm)|
|Weight||3.49 oz (99 g)|
the average is 5.3 oz (151 g)
|5.82 oz (165 g)|
the average is 5.3 oz (151 g)
|Features||Numeric keypad, Soft keys|
|Physical size||5.0 inches|
|Resolution||176 x 220 pixels||1080 x 1920 pixels|
Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.
Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.
|Screen-to-body ratio||70.64 %|
|Features||Light sensor, Proximity sensor|
Additional display - Shows specs of the phone's additional display
Resolution - Refers to the width and the length od the additional display
|96 x 80 pixels|
Colors - Shows the number of colors that the additional display supports
|Camera||0.3 megapixels VGA||13 megapixels|
Aperture size - The aperture of a camera is the opening through which light travels before it reaches the camera sensor. The smaller the number is, the bigger this opening is, allowing for more light to pass.
|Features||Digital zoom||Autofocus, Geo tagging|
|Shooting Modes||High Dynamic Range mode (HDR)|
|Camcorder||Yes||1920x1080 (1080p HD) (30 fps)|
|Front-facing camera||1.9 megapixels|
System chip - Most modern handsets use an advanced chip that includes many of the device’s hardware modules like the processor, Wi-Fi, Bluetooth and sometimes even the wireless radio. This field shows what particular system chip (or System-on-a-Chip) is used in the phone.
|Qualcomm Snapdragon S4 Pro APQ8064|
Processor - The processor is the main computing component of a phone and is a major factor when it comes to the overall speed of the device. Some more powerful smartphones use dual-core and quad-core processors designed to deliver greater performance.
|Quad-core, 1500 MHz, Krait|
|Graphics processor||Adreno 320|
System memory - System memory, or RAM memory is the type of memory that the device uses to temporarily store data from the OS or currently-running apps. The more RAM available to the device, the better the performance will be when multiple or heavier programs are running.
|2048 MB RAM|
|Built-in storage||16 GB|
|Talk time||3.60 hours|
the average is 15 h (880 min)
|Stand-by time||12.8 days (307 hours)|
the average is 16 days (380 h)
|Capacity||900 mAh||2500 mAh|
|Not user replaceable||Yes|
|Filter by||Album, Artist, Playlists|
|Features||Album art cover, Background playback|
CDMA - Code Division Multiple Access. A technique of multiplexing, also called spread spectrum, in which analog signals are converted into digital form for transmission. For each communication channel, the signals are encoded in a sequence known to the transmitter and the receiver for that channel. The foremost application is digital cellular phone technology from QUALCOMM that operates in the 800MHz band and 1.9GHz PCS band. CDMA phones are noted for their excellent call quality and long battery life.
|800, 1900 MHz|
|GSM||850, 900, 1800, 1900 MHz|
|UMTS||850, 1700/2100, 1900, 2100 MHz|
|Data||HSDPA+ (4G) 42.2 Mbit/s, HSUPA 5.76 Mbit/s, UMTS|
Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.
|Wi-Fi||802.11 a, b, g, n, dual-band|
|Features||Mass storage device, USB charging|
|Other||NFC, DLNA, Tethering, Computer sync, OTA sync|
|Notifications||Music ringtones (MP3), Vibration, Phone profiles, Speakerphone||Haptic feedback, Music ringtones (MP3), Polyphonic ringtones, Vibration, Flight mode, Silent mode, Speakerphone|
|Sensors||Accelerometer, Gyroscope, Compass|
|Other||Voice dialing, Voice commands, Voice recording, TTY/TDD||Voice dialing, Voice commands, Voice recording|
|Officially announced||12 Dec 2012|
|Accessories||Power adapter, USB Cable, Headphones|
|MSRP price||$ 499|
FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.
||05 Feb 2013|
|FCC ID value: R9C-X909 link|
FCC measured SAR
FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).
|Product Specific Use||0.75 W/kg|
|Simultaneous Transmission||1.02 W/kg|