x PhoneArena is hiring! Reviewer in the USA

Motorola PEBL U6 (V6) vs Motorola MOTO Z9 Size compare

phone

Motorola PEBL U6 (V6) Remove phone

Posted: 19 Mar 2005
Market Status: Released
phone

Motorola MOTO Z9 Remove phone

Posted: 16 Oct 2007
Market Status: Released

Add phone to compare

Design
Dimensions3.41 x 1.93 x 0.79 inches (86.5 x 49 x 20 mm)4.48 x 2.11 x 0.55 inches (114 x 53.5 x 14 mm) 
Weight3.88 oz (110 g)
the average is 5.3 oz (151 g)
4.90 oz (139 g)
the average is 5.3 oz (151 g)
 
FeaturesNumeric keypadNumeric keypad, Soft keys 
Display
Physical size 2.4 inches 
Resolution176 x 220 pixels240 x 320 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

 167 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio 29.25 % 
Additional display

Additional display - Shows specs of the phone's additional display

Yes  
Resolution

Resolution - Refers to the width and the length od the additional display

96 x 80 pixels  
Camera
Camera0.3 megapixels VGA2 megapixels 
Flash Yes 
Software FeaturesDigital zoomDigital zoom 
CamcorderYesYes 
Hardware
Built-in storage0.005 GB0.045 GB 
Storage expansion microSD, microSDHC 
Battery
Capacity740 mAh950 mAh 
TypeUser replaceable, Li - IonUser replaceable, Li - Ion 
Talk time6.67 hours
the average is 14 h (850 min)
4.00 hours
the average is 14 h (850 min)
 
Stand-by time10.4 days (250 hours)
the average is 15 days (370 h)
13.0 days (312 hours)
the average is 15 days (370 h)
 
specifications continue after the ad
Cellular
GSM850, 900, 1800, 1900 MHz850, 900, 1800, 1900 MHz 
UMTS 850, 1900 MHz 
Data UMTS, HSDPA 3.6 Mbit/s 
Phone features
NotificationsMusic ringtones (MP3), Polyphonic ringtones (24 voices), Vibration, Phone profiles, SpeakerphoneMusic ringtones (MP3), Vibration, Phone profiles, Speakerphone 
Hearing aid compatibility M3 
Other featuresVoice dialing, Voice commands, Voice recording, TTY/TDD, Push-to-TalkVoice dialing, Voice commands, Voice recording, TTY/TDD 
Connectivity
Bluetooth1.22.0 
USBYesYes 
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

 A-GPS 
OtherComputer syncComputer sync 
Availability
Officially announced14 Feb 200501 Apr 2008 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

08 Sep 200512 Dec 2007 
FCC ID value: IHDT56FJ1 linkFCC ID value: IHDP56HA1 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head0.32 W/kg0.94 W/kg 
Measured in1900 MHz1900 MHz 
Body0.15 W/kg0.64 W/kg 
Measured in1900 MHz1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories