x PhoneArena is hiring! Reviewer in the USA

Motorola MOTOROKR EM25 vs Motorola W395 Size compare

phone

Motorola MOTOROKR EM25 Remove phone

Posted: 05 Aug 2008
Market Status: Released
phone

Motorola W395 Remove phone

Posted: 27 Mar 2007
Market Status: Released

Add phone to compare

Design
Dimensions3.98 x 1.81 x 0.55 inches (101 x 46 x 13.9 mm)3.89 x 1.77 x 0.71 inches (99 x 45 x 18.1 mm) 
Weight3.00 oz (85 g)
the average is 5.2 oz (150 g)
3.42 oz (97 g)
the average is 5.2 oz (150 g)
 
FeaturesNumeric keypad, Soft keysNumeric keypad, Soft keys 
Display
Physical size1.8 inches  
Resolution128 x 160 pixels128 x 160 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

114 ppi  
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio21.94 %  
Additional display

Additional display - Shows specs of the phone's additional display

 Yes 
Resolution

Resolution - Refers to the width and the length od the additional display

 96 x 80 pixels 
Camera
Camera1.3 megapixels1.3 megapixels 
Software FeaturesDigital zoomDigital zoom 
Camcorder Yes 
Hardware
Built-in storage0.005 GB0.005 GB 
Storage expansionmicroSDmicroSD 
Battery
Capacity780 mAh850 mAh 
TypeUser replaceable, Li - IonUser replaceable, Li - Ion 
Talk time8.15 hours
the average is 15 h (886 min)
8.33 hours
the average is 15 h (886 min)
 
Stand-by time13.8 days (330 hours)
the average is 16 days (377 h)
8.3 days (200 hours)
the average is 16 days (377 h)
 
specifications continue after the ad
Multimedia
RadioFM, RDS  
Cellular
GSM850, 1900 MHz850, 900, 1800, 1900 MHz 
OtherOther version supports GSM 900/1800 MHz  
Phone features
NotificationsPolyphonic ringtones, Vibration, Phone profiles, SpeakerphoneMusic ringtones (MP3), Vibration, Phone profiles, Speakerphone 
Other featuresVoice recordingVoice recording 
Connectivity
Bluetooth2.0Yes 
USBUSB 2.0USB 2.0 
ConnectorminiUSB  
Other Computer sync 
Availability
Officially announced05 Aug 200827 Mar 2007 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

 01 Oct 2007 
 FCC ID value: IHDT56HR1 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head 0.31 W/kg 
Measured in 1900 MHz 
Body 0.19 W/kg 
Measured in 1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories