x PhoneArena is hiring! Reviewer in the USA

Motorola GLEAM+ vs Samsung GT-S3600 Size compare

phone

Motorola GLEAM+ Remove phone

Posted: 09 Feb 2012
Market Status: Released
phone

Samsung GT-S3600 Remove phone

Posted: 09 Dec 2008
Market Status: Released

Add phone to compare

Design
Device typeFeature phone  
Dimensions4.21 x 2.07 x 0.53 inches (107 x 52.5 x 13.5 mm)3.86 x 1.96 x 0.60 inches (98 x 49.8 x 15.3 mm) 
Weight3.70 oz (105 g)
the average is 5.3 oz (151 g)
3.70 oz (105 g)
the average is 5.3 oz (151 g)
 
FeaturesNumeric keypad, Soft keys, D-PadNumeric keypad, Soft keys 
ColorsWhite, Gray  
Display
Physical size2.8 inches  
Resolution240 x 400 pixels176 x 220 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

167 ppi  
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio39.69 %  
Additional display

Additional display - Shows specs of the phone's additional display

LED  
Camera
Camera2 megapixels1.3 megapixels 
Software FeaturesDigital zoomDigital zoom 
Settings White balance presets 
Shooting Modes Effects 
CamcorderYesYes 
Hardware
Built-in storage0.05 GB0.023 GB 
Storage expansionmicroSD, microSDHC up to 16 GBmicroSD 
Battery
Capacity750 mAh880 mAh 
User replaceableYesYes 
Talk time4.81 hours
the average is 14 h (838 min)
7.83 hours
the average is 14 h (838 min)
 
Stand-by time17.4 days (417 hours)
the average is 16 days (389 h)
20.0 days (480 hours)
the average is 16 days (389 h)
 
specifications continue after the ad
Multimedia
RadioFMFM, RDS 
Cellular
GSM900, 1800 MHz850, 900, 1800, 1900 MHz 
Phone features
NotificationsPolyphonic ringtones, VibrationMusic ringtones (MP3), Polyphonic ringtones (64 voices), Vibration, Phone profiles, Speakerphone 
Other features Voice recording 
Connectivity
Bluetooth2.1, EDR2.0 
USBUSB 2.0Yes 
ConnectormicroUSB  
FeaturesUSB charging  
Other Computer sync 
Availability
Officially announced09 Feb 2012  
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

 11 Sep 2008 
 FCC ID value: A3LSWDS3600 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head 0.15 W/kg 
Measured in 1900 MHz 
Body 0.91 W/kg 
Measured in 1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories