x PhoneArena is hiring! Reviewer in the USA

LG KC910i vs LG Xenon Size compare

phone

LG KC910i Remove phone

Posted: 18 Feb 2009
Market Status: Released
phone

LG Xenon Remove phone

Posted: 09 Mar 2009
Market Status: Released

Add phone to compare

Design
Dimensions4.24 x 2.20 x 0.55 inches (107.8 x 55.9 x 14 mm )4.16 x 2.11 x 0.62 inches (106 x 54 x 16 mm) 
Weight3.88 oz (110 g)
the average is 5.3 oz (151 g)
3.81 oz (108 g)
the average is 5.3 oz (151 g)
 
Features Full keyboard 
Display
Physical size3.0 inches2.8 inches 
Resolution240 x 400 pixels240 x 400 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

155 ppi167 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio42.57 %39.41 % 
Features Proximity sensor 
Camera
Camera8 megapixels2 megapixels 
FlashXenonLED 
Hardware FeaturesAutofocus  
Software FeaturesDigital zoom, Geo tagging, Manual focus, Digital image stabilization, Face detection, Smile detection, Blink detectionDigital zoom, Self-timer 
SettingsISO controlExposure compensation, White balance presets 
Shooting Modes Night mode, Burst mode, Effects 
Camcorder640x480 (VGA) (30 fps)Yes 
FeaturesVideo callingVideo sharing 
Front-facing cameraYes  
Hardware
Built-in storage 0.08 GB 
Storage expansionmicroSD, microSDHCmicroSD, microSDHC 
Battery
Capacity1000 mAh950 mAh 
TypeUser replaceable, Li - IonUser replaceable, Li - Ion 
Talk time 4.00 hours
the average is 14 h (857 min)
 
Stand-by time 11.0 days (264 hours)
the average is 15 days (370 h)
 
specifications continue after the ad
Multimedia
MirroringTV-out  
RadioFM  
Cellular
GSM850, 900, 1800, 1900 MHz850, 900, 1800, 1900 MHz 
UMTS2100 MHz850, 1900 MHz 
DataUMTS, HSDPA 7.2 Mbit/sUMTS, HSDPA 3.6 Mbit/s 
Phone features
SensorsAccelerometerAccelerometer 
NotificationsMusic ringtones (MP3), Vibration, Phone profiles, SpeakerphoneMusic ringtones (MP3), Vibration, Phone profiles, Speakerphone 
Other featuresVoice recordingVoice dialing (Speaker independent), Voice commands (Speaker independent), Voice recording 
Connectivity
Bluetooth2.0, EDR2.0 
Wi-FiYes  
USBUSB 2.0Yes 
Connector microUSB 
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

GPSA-GPS 
OtherComputer syncComputer sync 
Availability
Officially announced16 Feb 200930 Mar 2009 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

 23 Nov 2008 
 FCC ID value: BEJGR500 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head 0.49 W/kg 
Measured in 1900 MHz 
Body 0.21 W/kg 
Measured in 1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories