x We have placed cookies on your device to make your experience better. Find more info here.

LG GU280 vs Motorola i410 Size compare

phone

LG GU280 Remove phone

Posted: 11 Nov 2009
Market Status: Released
phone

Motorola i410 Remove phone

Posted: 25 Nov 2009
Market Status: Released

Add phone to compare

Design
Dimensions3.78 x 1.80 x 0.59 inches (96 x 45.7 x 14.9 mm)3.86 x 1.89 x 0.77 inches (98 x 48 x 19.6 mm) 
Weight3.60 oz (102 g)
the average is 5.3 oz (152 g)
4.52 oz (128 g)
the average is 5.3 oz (152 g)
 
Display
Physical size2.0 inches1.8 inches 
Resolution176 x 220 pixels128 x 160 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

141 ppi114 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTTFT 
Screen-to-body ratio28.68 %21.42 % 
Additional display

Additional display - Shows specs of the phone's additional display

 Yes 
Resolution

Resolution - Refers to the width and the length od the additional display

 96 x 32 pixels 
Physical Size 0.97 inches 
Camera
Camera1.3 megapixels  
FeaturesDigital zoom  
SettingsWhite balance presets  
Shooting ModesNight mode  
Camcorder   
176 x 144 pixels 15 fps  
Hardware
Built-in storage0.02 GB  
Storage expansionmicroSD, microSDHC up to 8 GB  
Battery
Talk time4.00 hours
the average is 14 h (870 min)
3.50 hours
the average is 14 h (870 min)
 
Stand-by time4.2 days (100 hours)
the average is 17 days (414 h)
7.0 days (168 hours)
the average is 17 days (414 h)
 
Capacity900 mAh1100 mAh 
specifications continue after the ad
Technology
iDEN

iDEN - iDEN (Integrated Digital Enhanced Network) is a wireless network standard developed by Motorola and used by Nextel Wireless. It operates at 800Mhz, 900Mhz and 1500Mhz frequency bands and it is a mixture of TDMA (Time Division Multiple Access) and GSM arhitecture. It allows the use of one mobile device as a digital phone, pager, two-way radio and fax/modem.

 800, 900 MHz 
GSM850, 900, 1800, 1900 MHz  
UMTS2100 MHz  
DataEDGE, UMTS  
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

 A-GPS 
Connectivity
Bluetooth2.1, EDR1.2 
USBUSB 2.0Yes 
ConnectormicroUSBmicroUSB 
OtherComputer sync  
Other features
NotificationsMusic ringtones (MP3), Polyphonic ringtones (72 voices), Vibration, Phone profiles, SpeakerphoneMusic ringtones (MP3), Vibration, Speakerphone 
OtherVoice recordingPush-to-Talk 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

11 Sep 200901 Sep 2009 
FCC ID value: BEJGU280 linkFCC ID value: IHDP56KR2 link 
FCC measured SAR

FCC measured SAR - The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value.

   
Head0.71 W/kg1.03 W/kg 
Measured in1900 MHz  
Body0.39 W/kg0.72 W/kg 
Measured in1900 MHz  

To see the full specifications with in-depth details click here.

Latest stories