x PhoneArena is hiring! Reviewer in the USA

LG 235C vs LG A340 Size compare

phone

LG 235C Remove phone

Posted: 16 Aug 2012
Market Status: Released
phone

LG A340 Remove phone

Posted: 11 Apr 2012
Market Status: Released

Add phone to compare

Design
Device typeBasic phoneFeature phone 
Dimensions3.8 x 1.9 x 0.7 inches (97 x 48 x 18 mm)4.02 x 2.05 x 0.67 inches (102 x 52 x 17 mm) 
Weight3.44 oz (98 g)
the average is 5.3 oz (151 g)
3.56 oz (101 g)
the average is 5.3 oz (151 g)
 
FeaturesNumeric keypad, Soft keys, D-Pad  
ColorsBlack  
Display
Physical size 2.4 inches 
Resolution 240 x 320 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

 167 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

 TFT 
Screen-to-body ratio 33.55 % 
Additional display

Additional display - Shows specs of the phone's additional display

LCDTFT 
Resolution

Resolution - Refers to the width and the length od the additional display

 128 x 160 pixels 
Physical Size 1.77 inches 
Camera
Camera0.3 megapixels VGA1.3 megapixels 
Software FeaturesDigital zoomDigital zoom 
Camcorder Yes 
Hardware
Built-in storage 0.0876 GB 
Storage expansion microSD, microSDHC up to 32 GB 
Battery
Capacity 900 mAh 
TypeUser replaceable, Li - IonUser replaceable, Li - Ion 
User replaceableYesYes 
Talk time3.00 hours
the average is 14 h (869 min)
3.00 hours
the average is 14 h (869 min)
 
Stand-by time12.5 days (192 hours)
the average is 16 days (377 h)
10.4 days (250 hours)
the average is 16 days (377 h)
 
specifications continue after the ad
Multimedia
Music player   
Filter by Playlists 
Cellular
GSM 850, 900, 1800, 1900 MHz 
UMTS 850, 1900 MHz 
Data HSPA, UMTS 
Phone features
NotificationsPolyphonic ringtones, SpeakerphonePolyphonic ringtones, Vibration, Flight mode, Silent mode, Speakerphone 
Hearing aid compatibilityM4M3, T4 
Other featuresVoice dialing, Voice commands, Voice recording, TTY/TDDVoice dialing, Voice commands, TTY/TDD 
Connectivity
Bluetooth2.12.1, EDR 
USB USB 2.0 
Connector microUSB 
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

 GPS 
Navigation Turn-by-turn navigation 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

 11 Jan 2012 
 FCC ID value: ZNFA340 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head 0.44 W/kg 
Body 0.84 W/kg 

To see the full specifications with in-depth details click here.

Latest stories