x PhoneArena is hiring! Reviewer in the USA

LG 235C vs LG 600g Size compare

phone

LG 235C Remove phone

Posted: 16 Aug 2012
Market Status: Released
phone

LG 600g Remove phone

Posted: 19 Nov 2008
Market Status: Released

Add phone to compare

Design
Device typeBasic phone  
Dimensions3.8 x 1.9 x 0.7 inches (97 x 48 x 18 mm)3.43 x 1.85 x 0.78 inches (87 x 47 x 20 mm) 
Weight3.44 oz (98 g)
the average is 5.3 oz (151 g)
1.98 oz (56 g)
the average is 5.3 oz (151 g)
 
FeaturesNumeric keypad, Soft keys, D-PadNumeric keypad, Soft keys 
ColorsBlack  
Display
Physical size 1.8 inches 
Resolution 128 x 160 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

 116 ppi 
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

 TFT 
Screen-to-body ratio 24.08 % 
Additional display

Additional display - Shows specs of the phone's additional display

LCDCSTN 
Resolution

Resolution - Refers to the width and the length od the additional display

 96 x 64 pixels 
Physical Size 0.90 inches 
Colors

Colors - Shows the number of colors that the additional display supports

 65 536 
Camera
Camera0.3 megapixels VGA0.3 megapixels VGA 
Software FeaturesDigital zoomSelf-timer 
Settings Exposure compensation, White balance presets 
Shooting Modes Burst mode, Effects 
Battery
Capacity 800 mAh 
TypeUser replaceable, Li - IonUser replaceable, Li - Ion 
Talk time3.00 hours
the average is 14 h (857 min)
3.00 hours
the average is 14 h (857 min)
 
Stand-by time12.5 days (192 hours)
the average is 15 days (370 h)
6.1 days (147 hours)
the average is 15 days (370 h)
 
Cellular
GSM 850, 1900 MHz 
specifications continue after the ad
Phone features
NotificationsPolyphonic ringtones, SpeakerphonePolyphonic ringtones (32 voices), Vibration, Phone profiles, Speakerphone 
Hearing aid compatibilityM4M3, T3 
Other featuresVoice dialing, Voice commands, Voice recording, TTY/TDDVoice recording, TTY/TDD 
Connectivity
Bluetooth2.12.0 
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

 17 Jan 2008 
 FCC ID value: BEJLG600G link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head 0.30 W/kg 
Measured in 1900 MHz 
Body 0.33 W/kg 
Measured in 1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories