x PhoneArena is hiring! Reviewer in the USA

Kyocera Neo E1100 vs Kyocera SE47 / SE44 / V5 SLIDER Size compare

phone

Kyocera Neo E1100 Remove phone

Posted: 03 Apr 2008
Market Status: Released
phone

Kyocera SE47 / SE44 / V5 SLIDER Remove phone

Posted: 14 Aug 2003
Market Status: Released

Add phone to compare

Design
Dimensions3.52 x 2.05 x 0.66 inches (89.5 x 52 x 16.7 mm)3.46 x 1.89 x 0.91 inches (88 x 48 x 23 mm) 
Weight3.17 oz (90 g)
the average is 5.2 oz (150 g)
3.39 oz (96 g)
the average is 5.2 oz (150 g)
 
FeaturesNumeric keypad, Soft keysNumeric keypad 
Display
Physical size2.2 inches  
Resolution240 x 320 pixels128 x 128 pixels 
Pixel density

Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.

182 ppi  
Technology

Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.

TFTSTN 
Screen-to-body ratio32.20 %  
Additional display

Additional display - Shows specs of the phone's additional display

OLED  
Resolution

Resolution - Refers to the width and the length od the additional display

104 x 16 pixels  
Camera
Camera1.3 megapixels  
Software FeaturesDigital zoom  
Battery
Capacity790 mAh1100 mAh 
TypeUser replaceable, Li - IonUser replaceable, Li - Ion 
Talk time3.66 hours
the average is 15 h (886 min)
4.00 hours
the average is 15 h (886 min)
 
Stand-by time9.2 days (220 hours)
the average is 16 days (377 h)
7.5 days (180 hours)
the average is 16 days (377 h)
 
Cellular
CDMA

CDMA - Code Division Multiple Access. A technique of multiplexing, also called spread spectrum, in which analog signals are converted into digital form for transmission. For each communication channel, the signals are encoded in a sequence known to the transmitter and the receiver for that channel. The foremost application is digital cellular phone technology from QUALCOMM that operates in the 800MHz band and 1.9GHz PCS band. CDMA phones are noted for their excellent call quality and long battery life.

800, 1700/2100, 1900 MHz800, 1900 MHz 
specifications continue after the ad
Phone features
NotificationsMusic ringtones (MP3, AAC), Vibration, Phone profiles, SpeakerphoneVibration, Speakerphone 
Other featuresVoice dialing, Voice recording, TTY/TDDVoice dialing, Voice commands, Voice recording, TTY/TDD, Push-to-Talk 
Connectivity
Bluetooth2.0  
USBYes  
ConnectormicroUSB  
Positioning

Positioning - This field shows the positioning systems supported by the device. There are three main types: GPS, A-GPS and GLONASS. GPS - This is one of the most widespread global positioning technologies, developed and maintained by the U.S. government. It uses satellites in order to detect your location. Works best in clear weather. A-GPS - A-GPS stands for Assisted GPS and is the industry standard for positioning and navigation. “Assisted” means that it can use local wireless networks, in addition to satellites, for quicker and more precise localization. GLONASS - GLONASS is a global positioning system, developed by the Russian Federation. It’s very similar to GPS, but isn’t so popular in cell phones.

S-GPSGPS 
Other Computer sync 
Availability
Officially announced01 Apr 2008  
Regulatory Approval
FCC approval

FCC approval - The Federal Communications Commission (FCC) is an independent United States government agency, directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. Every wireless phone device that is sold in the U.S. has to be tested and approved for sale by the FCC.

   
Date approved

Date approved - Shows the date when the particular phone is approved by the Federal Communications Commission

29 Aug 200814 Aug 2003 
FCC ID value: OVFKWC-K3801 linkFCC ID value: OVFKWC-SE47 link 
FCC measured SAR

FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).

   
Head1.42 W/kg0.71 W/kg 
Measured in1900 MHz1900 MHz 
Body1.11 W/kg0.57 W/kg 
Measured in1900 MHz1900 MHz 

To see the full specifications with in-depth details click here.

Latest stories