Alcatel OT-282 vs ZTE T203
Add phone to compare
| Design | |||
|---|---|---|---|
| Device type | Basic phone | Basic phone | |
| Form factor | Candybar | Candybar | |
| Dimensions | 4.28 x 2.00 x 0.53 inches (108.8 x 50.8 x 13.5 mm) | ||
| Weight | 3.04 oz (86 g) the average is 4.4 oz (126 g) | ||
| Design features | Numeric keypad | Numeric keypad |
| Display | |||
|---|---|---|---|
| Physical size | 1.8 inches | 1.8 inches | |
| Resolution | 128 x 160 pixels | 128 x 160 pixels | |
Pixel density
Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is. | 114 ppi | 114 ppi | |
Technology
Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays. | TFT | TFT | |
| Colors | 65 536 | 262 144 |
| Battery | |||
|---|---|---|---|
| Talk time | 3.00 hours the average is 10 h (626 min) | ||
| Stand-by time | 12.5 days (300 hours) the average is 18 days (435 h) |
| Multimedia | |||
|---|---|---|---|
| Radio | FM | FM | |
| Speakers | Earpiece, Loudspeaker |
| Technology | |||
|---|---|---|---|
| GSM | 850, 900, 1800, 1900 MHz | 900, 1800 MHz | |
| Global Roaming | Yes |
| Phone features | |||
|---|---|---|---|
| Organizer | Calendar, Alarm, Calculator | Flashlight | |
| Messaging | SMS, Predictive text input | SMS |
| Other features | |||
|---|---|---|---|
| Notifications | Polyphonic ringtones, Vibration, Silent mode, Speakerphone |
| Regulatory Approval | |||
|---|---|---|---|
FCC measured SAR
FCC measured SAR - The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value. | |||
| Head | 0.56 W/kg | 1.13 W/kg | |
| Body | 0.67 W/kg | 0.49 W/kg |
