- Low pixel density screen (167 ppi)
- Resistive touchscreen technology means its display is less sensitive than you would like it to be
- Low resolution display (320 x 240 pixels)
- The camera lacks autofocus
- The camera lacks flash
- Lacks an ambient light sensor for automatic screen brightness adjustment
- Lacks a proximity sensor that turns the display оff during a phone call
- Device type:
- Feature phone
- 4.53 x 2.40 x 0.51 inches (115 x 61 x 13 mm)
the average is 5.3 oz (151 g) 3.63 oz (103 g)
- 3.63 oz (103 g)
- Full keyboard, Soft keys, D-Pad
- Physical size:
- 2.4 inches
- 320 x 240 pixels
- Pixel density:
Pixel density - The pixel density of a display represents the number of pixels over an area of one inch. It’s measured in “pixels per inch”, or ppi. The higher the number, the more detailed and good-looking the display is.
- 167 ppi
Technology - There are two main screen technologies currently used in phones and tablets: LCD and AMOLED. The former usually features a light source and liquid crystals, while the latter is based on organic light-emitting diodes. Newer LCD variations like IPS-LCD and Super-LCD allow for very accurate color reproduction and very wide viewing angles, where no significant image quality loss is observed. Current AMOLED screens differ in such a way that they can exhibit much more saturated colors (sometimes too much) and incredibly high contrast levels, which is due to black color being completely black in AMOLED displays.
- Screen-to-body ratio:
- 25.43 %
- 2 megapixels
- Built-in storage:
- 0.05 GB
- Storage expansion:
- FM, RDS
- Earpiece, Loudspeaker
- 900, 1800 MHz
- Music ringtones, Polyphonic ringtones, Vibration, Silent mode, Speakerphone
- FCC measured SAR:
FCC measured SAR - Working closely with federal health and safety agencies, such as the Food and Drug Administration (FDA), the FCC has adopted limits for safe exposure to radiofrequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure. Any cell phone at or below these SAR levels (that is, any phone legally sold in the U.S.) is a "safe" phone, as measured by these standards. The FCC limit for public exposure from cellular telephones is an SAR level of 1.6 watts per kilogram (1.6 W/kg).
- 1.00 W/kg
- 0.70 W/kg
We list only the specs that are different than the main variant
- Multiple SIM cards:
- 2 slots
Despite our efforts to provide full and correct Alcatel OT-819 specifications, there is always a possibility of making a mistake. If you see any wrong or incomplete data, please LET US KNOW.
If you are interested in using our specs commercially, check out our Phone specs database licensing page.